Rebuilding Maintenance & Repair
Maintenanace Solutions
Wear Prevention & Rebuilding
- Restores worn surfaces
- Provides wear & impact resistant coatings
- Use on new parts to extend life
- Available in both trowlable & brushable forms
Wearing
Compound | High
Impact Wearing Compound | |
| Color | Grey | Grey |
| Maximum Temperature | 250°F(121°C) | 250°F(121°C) |
| Working Time | 30
min | 30
min |
| Cure Timw | 7
hrs | 6
hrs |
| Avaialble Sizes | 5
lb, 25 lb kit | 25
lb. kit |
Pneu-Wear | Brushable
Ceramic | |
| Color | Grey | Grey
or White |
| Maximum Temperature | 250°F(121°C) | 200°F(93°C) |
| Working Time | 30
min | Gray
30 min, White 15 min |
| Cure Timw | 6
hrs | Grey
6 hrs., White 5 hrs |
| Avaialble Sizes | 3
lb, 5 lb, 25lb kit | 2lb,
6lb, kits |
Combo
Bead Wearing Compound | Flex
Brushable | |
| Color | Grey | Black |
| Maximum Temperature | 250°F(121°C) | 180°F
(82°C) |
| Working Time | 25
min | 10
min. |
| Cure Timw | 8
hrs | 6
hrs |
| Avaialble Sizes | 6lb,
Kit | 1lb
kit |
Flex
80 Putty | |
| Color | Black |
| Maximum Temperature | 180°F
(82°C) |
| Working Time | 10
min |
| Cure Timw | 6
hrs |
| Avaialble Sizes | 1lb
kit |
 | Loctite Nordbak Wearing Compound Trowelable compound that protects against sliding abrasion. Use to rebuild & protect chutes, pump housing, elbows, cyclones, and material handling equipments. |
 | Loctite Nordbak High Impact Wearing Compound Rubber modified compound absorbs impacts. Recommended where both sliding abrasion & impacts are present. |
Additional
Products | |
NAME | TYPE |
Nordbak
High Temp Wearing Compound | 450°F (232°C) |
Nordbak
High Temp Pneu Wear | 450°F (232°C) |
Nordbak
Ultra High Temp Wearing Compound | 550°F (288°C) |
Nordbak
Ultra High Temp Pneu Wea | 550°F (288°C) |
Nordbak
Fast Cure Wearing Compound | 3 hr. cure |
Nordbak
Fast Cure Wear | 3 hr. cure |
Nordbak
High Temp Brushable Ceramic | 550°F (288°C) |
Nordbak
Chemical Resistant Coating | 150°F (66°C) |
Nordbak
Castable Wearing Compound | Mold wear resistant parts |
Nordbak
Ceramic Tile Adhesive | 200°F (93°C) |
Fixmaster
Flex Metal Primer | Promotes the adhesion of Loctite Flex Urethabes to metal |
| Home | Company profile | Products | Contact Us | Useful Links |
products
| Assembly Solutions | Maintenance Solutions | Pre-Applied | Elgi pneumatic Tools | Diamant | Molysulf |
| Shield | WD-40 | Shailnick | Pro-safe |
Maintenance Solutions
| Metal Rebuilding & Shaft Repair | Wear Prevention & Rebuilding | Floor Repair & Grouting | Belt Repair |
| Anti-Seize Lubrication | Surface Protection & Rust Prevention | Parts & Surface Cleaning | Anti-Slip Flooring |
Rebuilding Maintenance & Repair
