Products

 

 

 


 

 Threadlocking

LOCKING OF THREADED FASTERNERS
  • Threadlocking prevents loosening from shock & vibration
  • Single part - clean & easy to apply
  • Threadlocking can be used in various sizes of fasteners - reduces inventory costs
  • Seals threads
  • Stops rust & corrosion
 
Loctite 290
Wicking Threadlocker

Recommended for Threadlocking pre-assembled fasterners, ie instrumentation screws, electrical connectors, and set screws. Also seals porosities in welds and metal parts. Mil Spec(S-46163A)
Type III, Grade R.
NSF / ANSI 61
Loctite 243
Threadlocker

Effective on all types of metal threaded fasteners.Threadlocking Prevents loosening on vibrating parts such as pumps, motor mounting bolts, gear boxes, or presses. Recommended for use where disassembly with hand tools is requried for servicing and where parts are contaminated with oil.
NSF / ANSI 61. Agriculture canada Approved.
   
 
SOLUTON 290 222
Fastener Size #2 to 1/2" Up to 1/4"
Strength Medium/High Low
Cure Time (Fixture/Full Strength)* 20 min./24 hr. 20 min./24 hr.
Breakaway/Prevail Torque Ib.in.(N.M) 85/250 (10/29) 53/30 (6/4)
Temperature Resistance for Continuous Service 300°F (150°C) 300°F (150°C)
Avaialble Sizes 50 ml, 250 ml 50 ml, 250 ml
   
 
SOLUTON 242 243
Fastener Size 1/4" to 3/4" Up to 3/4"
Strength Medium Medium
Cure Time (Fixture/Full Strength)* 10 min. / 24 hr 10 min./24 hr.
Breakaway/Prevail Torque Ib.in.(N.M) 110/43 (12/5) 180/62 (20/7)
Temperature Resistance for Continuous Service 300°F (150°C) 300°F (150°C)
Avaialble Sizes 50 ml, 250 ml 50 ml, 250 ml

   
 
SOLUTON 262 270
Fastener Size Up to 3/4" Up to 3/4"
Strength High Permanent
Cure Time (Fixture/Full Strength)* 20 min./24 hr. 30 min. / 24 hr
Breakaway/Prevail Torque Ib.in.(N.M) 189/275 (22/32) 230/350 (26/36)
Temperature Resistance for Continuous Service 300°F (150°C) 300°F (150°C)
Avaialble Sizes 50 ml, 250 ml 50 ml, 250 ml

   
 

ADDIIONAL PRODUCTS
NAME STRENGTH BREAKAWAY/PREVAIL TORQUE (lb./in.) FEATURES
220 Low 85/170 Wicking
272 High 200/220 High Temperature up to 1 1/2"
277 High 275/275 Fasteners up to 1 1/2"
 
 

USE Loctite 7649 Primer N to:

  1. Activate inactive surfaces
  2. Speed cure times for faster return to service
  3. Speed curing through larger gaps and deep threads.
  4. Substantially speed cure times on cold parts.
  5. Act as a cleaning agent.


Cleaning agents


Primer is optional with:

Active surfaces: Brass, copper, bronze, iron, soft steel, nickel.

Primer is required with:
Inactive surfaces : Aluminium, stainless steel, magnesium, zinc, black oxide, cadmium, titanium, others.

 
Website Design By Nissiinfotech.com